Gantry Type Fiber Laser Cutting Machine
GS-L Series
8000W-40000W
Min. Working Area 42.65′ x 9.84′
Max. Working Area 82.02′ x 11.48′
cut up to 80mm thick
Specifications
Gantry Type Fiber Laser Cutting Machine
Ground Rail Type Segmented Bed Frame
Customize large processing areas with freedom. The segmented design of the ground rail allows for easy replacement of damaged sections, ensuring ultra-low replacement costs.
Intelligent Protection
The crossbeam is equipped with a safety light curtain that enables intelligent anti-collision detection. If an operator enters by mistake during operation, the laser machine will stop urgently to prevent safety accidents and ensure the safety of operators.
Super Large Processing Format
Super large processing format with gantry style segmented design, freely customized processing format according to customer needs.
Intelligent Protection
This large-format fiber laser cutting machine has the industry’s largest Z-axis travel and height at 400mm, supporting ultra-thick plate cutting. It can cut square and channel steel within a range of 400mm.
Technical Parameter
Gantry Type Fiber Laser Cutting Machine
4000W-8000W
Laser Power
GS-L Series
Series
Open Type Fiber Laser Cutting Machine
New GS-3015
1000W-12000W
Min. Working Area 9.84′ x 4.92′
Max. Working Area 19.69′ x 8.20′
cut up to 50mm thick
Specifications
Open Type Fiber Laser Cutting Machine
More Stable Performance
The industrial AC can adjust both the temperature of the electrical components and the laser. No fear of increasing temperature affecting the processing caused by long-term work. More stable performance supports long-term mass production.
Low Maintenance Costs
Equipped with automated grease injection, intelligent air pressure monitoring, and advanced safety protection systems, effectively minimizing maintenance cost investments.
More Compact Layout
The world’s only solution for 8 machines in a 40HQ container, great savings on shipping costs. Compact structure,small size, small floor area, suitable for small factories enter-in. You can place it anywhere in your workshop without site restrictions
Technical Parameter
Open Type Fiber Laser Cutting Machine
1000W-12000W
Laser Power
New GS-3015
Series
Enclosed Exchange Table Fiber Laser Cutting Machine
VS-C Series
1500W-12000W
Min. Working Area 9.84′ x 4.92′
Max. Working Area 19.69′ x 8.20′
cut up to 50mm thick
Specifications
Enclosed Exchange Table Fiber Laser Cutting Machine
Air Pressure Monitoring Intelligent Warning
Equipped with air pressure monitoring and electric proportional valve, the system provides intelligent alerts. If air pressure is insufficient, the equipment halts, preventing potential faults, fires, and material waste.
Industrial Grade Air Conditioner
European standard industrial-grade special air conditioners are used for efficient cooling. These systems effectively reduce ambient temperature and humidity, ensuring extended equipment stability and service life and optimal performance.
No Fear of Site Restrictions
The machine has 3-direction air duct interfaces and bothside hoppers, no need to carry out dangerous operations such as dismantling walls when installing on the customer’s site. It can be flexibly assembled according to the site with small site restrictions.
Industrial Grade Air Conditioner
Dual Control Workbench with an industry-exclusive dual-sided exchangeable control panel ensures convenient operation, enhancing overall production efficiency.
Technical Parameter
Enclosed Exchange Table Fiber Laser Cutting Machine
15000W-12000W
Laser Power
VS-C Series
Series
Super High Power Fiber Laser Cutting Machine
NS-CE Series
20000W-80000W
Min. Working Area 13.12′ x 6.56′
Max. Working Area 39.37′ x 8.20′
cut up to 100mm thick
Specifications
Super High Power Fiber Laser Cutting Machine
Whole Machine Full Servo Control
Realize digital positioning and ultra-high precision cutting, effectively improve the positioning accuracy of the worktable, improve the traction force, and reduce the failure rate.
Extreme Thickness Cutting
High power laser cutting machine, NS Series, has the largest net space of the workbench and the largest height between the workbench and the cutting head in the industry, supporting extreme thickness cutting.
Industry's First Double Bed Frame
Double beds separately carry the weight of the worktable and the moving components, has a super strong bearing capacity. It can effectively avoid affecting cutting accuracy and producing defective products due to overloading and high temperature.
Double Exchange Worktable
Double-chain, dual-motor drive ensures efficiency. Supports various worktable movements for flexibility. Easy to clean and maintain, suitable for cutting larger shell parts.
Technical Parameter
Super High Power Fiber Laser Cutting Machine
20000W-80000W
Laser Power
NS-CE Series
Series
Get in touch
